Austral Monsoon "AT100" Tilt Door

Maximum Size

10,000mm wide x 5000mm height.

Applications

The Austral Monsoon AT100 Tilt Up speciality door is suitable for most commercial and light industrial applications. It is widely used in schools, showrooms, car parks and workshops.

Features

1. Door structure - It is counter-weight balanced and constructed with single leaf. The bottom doorframe will swing outwards and up during operation.
2. Door frame - The specialist doorframe is made from Duragal RHS steel and is designed and manufactured according to Australian Standards.
3. Door clad - The door has various cladding options, including bar grilles, various types of glass including double glazing (with custom aluminium housing to mount the glass), Colorbond sheeting of various profiles, perforated sheets, meshes, timber battens, CFC sheets, plywoods, louvers, Danpalon, in fact virtually any building industry cladding in existence can be mounted to this type of door.
4. Door seal - The door is usually sealed with nylon brushes around the perimeter. However upon request we can add acoustic seals in line with your project specifications.
5. Door lock - Pad bolts can be fitted to the internal doorframe for hand operated doors. Locking is not recommended for electrically operated speciality doors.
6. Counterweights - Used to balance the door, located on both sides of the door. Billet steel is welded to a pulley system and finished off with custommade cover plates. Counterweights match the weight of the door panel.
7. Counter weight cover - Made of 1.2mm galvanised steel or zincalume sheet which is then painted or powder coated to the same colour as the door frame. The cover fits around the door counter weights for safety. It is usually the same height as the doorframe, but can be altered, in line with your project specifications.
8. Door finish - The door can be painted in Dulux Acrathane two pack paint or in some cases powder coated to the colour specified (depending on panel size, maximum is 2.7m high x 10m long for powder coating).
9. Door operation - The door can be motorized or hand operated. Motorising options are numerous and allow simple push button operation or fully integrated systems with remote controllers, safety infrared beams, sensor systems and other car-park suitable control systems.
10. Extra option - A Personal Access (PA) door can be fitted to the doorframe with hinges. The personal access door will open outwards.
11. Room required for fixing - Generally 300mm side room needed for counter weight and 450mm headroom required for motorization.

Technical Information

AT100 - TILT DOOR HEADROOM AND SIDE ROOM DETAIL.pdf
AT100 - TILT DOOR OPERATIONAL VIEW.pdf